What Does Half Water Bleaching Mean?

Float adjustment refers to adjusting the balance state of the fishing set in the water. The principle is to increase and decrease the weight of the lead sinker and move the position of the float to make the gravity of the line group and the buoyancy of the float reach a dynamic balance. In this way, the fish can accurately and quickly transfer the action of eating bait to the float. Let’s take a look at what half-water float is meant!

1. Definition discussion

Half-water float adjustment refers to the float adjustment when the double hook is off the bottom. Half water is a special noun for fishing. The so-called half water does not mean half the depth of the water. In fact, as long as the fishing gear is completely off the bottom, it can be considered half water. When adjusting the float, it is generally required to adjust the float in a half water state, so that the sensitivity of the line group can be adjusted more accurately. If the fish hook lies at the bottom of the water, it is difficult to adjust the ideal state.

2. The principle of bleaching

Float adjustment refers to adjusting the balance state of the fishing group in the water. The principle is to increase or decrease the weight of the lead sinker and move the position of the float to make the gravity generated by the fishing group and the buoyancy generated by the float reach a dynamic balance. In this way, once a fish eats the bait, it will break the balance of the line group and accurately transfer it to the float, so that the fisherman can judge whether he needs to lift a rod and stab the fish based on the movement of the float.

3. Steps for adjusting float

1. Find the bottom of heavy lead: Add a large lead to the lead base and throw it into the water. The float will be completely immersed in the water under the gravity of the lead sinker. Lift the rod and pull the float until the float level. At this time, the distance between the lead sinker and the top of the float (not the float seat) is the approximate water depth.

2. Half water mesh adjustment: The distance between the float pulling down is greater than the length of the float and the sub-line, trim the lead until the float reveals the number of mesh you want to adjust. For example, when adjusting 4 mesh, cut the lead to the float exposed to the water surface for 4 mesh. At this time, the gravity of the lead sinker is roughly equal to the buoyancy of the float.

3. Hang bait for fishing: The bait on the double hook is thrown into the water, and the number of images on which the float is exposed to the water surface is the fishing eye. For example, the empty hook is adjusted to 4 images. After hanging the bait, 3 images on which the float is exposed to 3 images are "adjust four fishing three". When fishing, you can adjust the water layer where the bait is located by moving the float position.

4. Drifting term

1. Find the bottom: Find the bottom is a special term for waft adjustment, which refers to adding a large lead to the online group and using the gravity of the lead sinker to test the approximate water depth of the fishing point.

2. Half water: Half water is a special term for wading adjustment, not half of the water depth. In fact, as long as the fishing gear can be completely off the bottom, it is considered half water.

3. Flat water: Flat water is a special term for regulating floats, which means that the float is just parallel to the water surface, and the leveling water of the vertical float can be considered as "0" mesh.

4. Adjustment: Adjustment is a special term for adjusting floats. It refers to the empty hook trimming the lead strip to expose the number of times the float wants to adjust by trimming the lead.

5. Fishing Eye: Fishing Eye is a special term for adjusting floats. It refers to the double hook hanging bait and move the float position to expose the number of fish you want to fish.